This 330FT mill will be a real torque-monster when we're done with it. After breaking the glaze on the cylinders with my hone tool, I chamfered the edges, oiled them up and flipped it over to install the camshaft.
With plenty of Melling Lube I installed the camshaft.....
....then checked the camshaft endplay. Barely 0.001 - a real tighty!
Tomorrow I'll install the crank and button up the bottom.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjy1vtkkATuUDGwrZhq9RSqxLbLozLbbDDrdIcKF7kNK07Q2bIsf4pd8oR2m-UuqNhJMOb130A-gnfuhhb24sLP1QiPW6mLclH-j2x1waklHxQ_mgKKTo7LOWWAsoKAe5QxfFkswTjNaVQV/s400/IMG00228-20120430-1615-727156.jpg)
Back on the Cougar, I prepped the left side inner apron for installation. It took quite a bit of shaping, trimming and some brake-work to get 'er much closer. These 2 parts will go a long way to making the engine compartment the perfect backdrop for a well-detailed engine.
Don't forget to check out the website at www.E-tekRestorations.com !